PBT: Attaching the Pockets

This post is part of a series of tutorials on how to create your own unique crochet pixie pocket belt – to read more about this series visit the Intro page.

DSC_1621

So far we’ve covered basic shapes in the form of pockets such as circles, squares & rectangles, triangles, and cones – now it’s time to take all the pockets and attach them to the belt base using slip stitch crochet. Like the rest of this project, there is no strictly “right” way to do this, but I’ve included lots of process photos to show how I manage this part.

I prefer the look of pockets mounted directly onto the belt, with the backs up against the belt itself. I also always double-mount my pockets, using two lines of slip stitching, one at the top and one in the middle, to attach the pockets to the belt base. This is not absolutely necessary if you want to skip the second mount (the middle mount is the trickiest part of this) but it does make them really sturdy.  I have seen my festival friends put these things through the wringer with use – and they hold up!

If you need more inspiration on the ways you can assemble the belt, remember to check out my Pinterest board featuring crochet utility belts!

Attaching the Pockets to the Belt

DSC_1560

To begin the final stage of crochet for the pocket belt, lay out your belt base and grab all of your completed pockets. Decide how to place the pockets, arranging them along the belt base in whatever manner strikes your fancy – I like the pockets to sit near the ends, but sometimes they are all over the place. Here, because I’m featuring a bustle back, I keep them corralled near the ends so as not to cover the back of the skirt.

DSC_1561

The first step is to get a yarn and start slip stitching across the top of the belt base. I am using a really textured yarn for this part, just to add a little extra crazy.

DSC_1564

Here, I’m just slip stitching across the top of the belt until I get to a place where I’d like to put a pocket. Keep slip stitching, but now work through two layers – the top edge of the pocket (the back part only, since you don’t want to stitch the pocket closed) and the top edge of the belt base.

DSC_1568

DSC_1571

DSC_1572

DSC_1573

DSC_1577

This is the first attachment. Keep slip stitching until you want to place another pocket.

DSC_1581

Then, slip stitch across the pocket and belt simultaneously again.

DSC_1584

DSC_1585

For drawstring pockets like this one, make sure you leave enough pocket unattached for it to be able to close nicely.

DSC_1587

Keep slip stitching and attaching pockets until you reach the opposite end of the belt.

DSC_1588

DSC_1594

For the envelope-style pocket, I decide to make the slip stitch attaching underneath the top flap – so I open it up and stitch through the pocket layer and the belt layer underneath.

DSC_1595

DSC_1596

DSC_1597

DSC_1599

At the end, I rotate and work one row of the side of the belt base, then rotate again and start to slip stitch across the middle of the belt, placing my stitches in between the double crochets that make up the middle row.

DSC_1600

Attaching in the middle can require some really creative maneuvering on the part of the hook-wielder. In fact, this part is more like guerilla fiber-punk yarn wrestling. So be prepared for that! 😀

DSC_1601

To work the second row of attaching, slip stitch until you reach a pocket. With the back of the pocket facing you, insert your hook into the stitching and back out on the other side of a single stitch, catching the post of the stitch with your hook.

DSC_1602

Then, insert the hook through the middle of the belt. Yarn over and draw this loop through the belt, the post of the pocket stitching, and the loop on your hook, making one slip stitch through two layers.

DSC_1603

DSC_1606

 

Continue this process for at least part of the back of the pocket. When you’ve attached enough of the back of the pocket, keep slip stitching through just the belt layer as normal until you reach the next pocket, then work through both layers in the same manner again.

DSC_1608

DSC_1609

DSC_1610

DSC_1612

Here you can see the back of the slip stitching of the second row on the inside of a pocket – just enough to hold them down and make sure they are extra secure.

DSC_1615

DSC_1613

The pockets are now attached!

DSC_1614

After working the second round of attaching, I like to do one more row of slip stitching into the same stitches across the top of the belt, just for extra firmness (to reduce yarn stretching on the belt base) and to add more color and depth. Here I’ll change colors, then just work a simple line of slip stitching all the way across, right next to the first line of slip stitches (or wherever… FREEFORM!!)

DSC_1618

DSC_1623

After this last finishing touch, I’m DONE with the crochet portion of the belt! Time to weave in my ends, then tackle the final step: the fabric fringe skirt. After that post, I’ll do a final reveal and wrap-up – I can’t wait to show the final product 🙂

DSC_1621

-MF

Advertisements

One thought on “PBT: Attaching the Pockets

  1. Pingback: Pixie Belt Tutorial: Intro | Morale Fiber

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s