Hedge Witch Hat Pattern

Sounds trendy to talk about how much you love Halloween these days, but like, I really love Halloween guys. No trend shame here. That’s why despite the myriad and awesome crochet witch hat patterns out there, I had to design my own. I wanted a certain look and after a few tries, I really like what I came up with!

UPDATE 5/28/20 – I have added a second variation to this hat – there are now instructions for both Type A (appearing first – a bit taller and pointier) and Type B (appearing below Type A instructions, a little shorter and curvier). I’ve also added a purchasable, downloadable, ad-free PDF for this pattern in my Etsy Shop and Ravelry Store! ❀ thank you!

This free crochet pattern works with worsted weight yarn in half double stitches, and utilizes the Switchback Join technique to keep the seam straight, which you can find in this free tutorial on my blog!

Please excuse the fact that I had way too much fun creating a vintage witch photoshoot πŸ˜‰

Hedge Witch Hat

Show Above: Type A

Materials:
3.75 mm hk
#4 weight yarn – Approximately 200-250 yds

Gauge: 4 sts & 3 rows – 1” in hdc

Finished measurements: ~ 25β€³ on the inside, 36β€³ brim on the outside, 9-10β€³ height

Types: A (Pointier, black & dark gray versions), B (Rounder, light gray and tan versions)

(Show above: Type B. Also wearing the Embla Vest!
Show above: Type B

Stitches (sts) & Abbreviations
half-double crochet (hdc)
slip stitch (sl st)
chain (ch)
back loop only (BLO)
round (rnd)
each (ea)

Special Techniques & Notes:

The Switchback Join

Β This pattern uses a special join to keep the seam straight. This technique uses a system of backward and forward positioning, alternating on each row. The end of each backward row is joined by slip stitching forward by one stitch in a special way, as shown in my free tutorial which can be accessed here:
https://moralefiber.blog/2019/10/02/switchback-join-tutorial/
The Switchback Join method is marked on the pattern instructions to keep track. This join must be used if you want the curves of the hat positioned correctly. If you want a knobbly chaos witch hat, feel free to skip!

Notes: All tutorial images appear after the written instructions they are depicting

Instructions, Type A:

Rnd 1 (back): hdc 8 into magic ring. Join with a sl st

Rnd 2 (forward): 1 hdc in ea st. Join with a slip st to first hdc of the rnd. – 8 sts

Rnd 3 (back):  Ch 1 (does not count as first hdc). 1 hdc in the same st. 2 hdc in the next st. (1 hdc in the next st, 2 hdc in the next st) 3 times. Join with a sl st.  β€“ 12 sts

Rnd 4 (forward): Ch1 (does not count as first hdc). 1 hdc in the same st, 1 hdc in the next st. 2 hdc in the next st.  (1 hdc in ea of the next 2 sts, 2 hdc in the next st) 3 times. Join with a sl st.  β€“ 16 sts

Rnd 5 (backward): Ch 1 (does not count as first hdc). 1 hdc in the same st, 1 hdc in ea of the next 2 sts. 2 hdc in the next st. (1 hdc in ea of the next 3 sts, 2 hdc in the next st) 3 times.  Join with a sl st.  β€“ 20 sts

Rnd 6 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st and in ea of the next 3 sts. 2 hdc in the next st. (1 hdc in ea of the next 4 sts, 2 hdc in the next st) 3 times. Join with a sl st.  β€“ 24 sts

Rnd 7 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 24 sts

Rnd 8 (forward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 24 sts

Rnd 9 (backward): Ch 1 (does not count as first hdc). 2 hdc in the same st. (2 hdc in the next st) 5 times. 1 hdc in ea of the next 12 sts. (2 hdc in the next st) 6 times. Join with a sl st.  β€“ 36 sts

The first 6 increases
Hdc in the next 12 sts
Increase in the last 6 sts

Rnd 10 (forward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 36 sts

Rnd 11 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 36 sts

Rnd 12 (forward): Ch 1 (does not count as first hdc). 2 hdc in the same st. (2 hdc in the next st) 8 times. 1 hdc in ea of the next 18 sts. (2 hdc in the next st) 9 times. Join with a sl st.  β€“ 54 sts

The curve of the hat will be offset from concentrating the increases on one side

Rnd 13 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 54 sts

Rnd 14 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st, 1 hdc in ea of the next 7 sts. 2 hdc in the next st. (1 hdc in ea of the next 8 sts, 2 hdc in the next st) 5 times. Join with a sl st. – 60 sts

Rnd 15 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 60 sts

Rnd 16 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 8 sts. 2 hdc in the next st. (1 hdc in ea of the next 9 sts, 2 hdc in the next st) 5 times. Join with a sl st. – 66 sts

Rnd 17 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 66 sts

Rnd 18 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 9 sts. 2 hdc in the next st. (1 hdc in ea of the next 10 sts, 2 hdc in the next st) 5 times. Join with a sl st. – 72 sts

Rnd 19 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 72 sts

Rnd 20 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 10 sts. 2 hdc in the next st. (1 hdc in ea of the next 11 sts, 2 hdc in the next st) 5 times. Join with a sl st. – 78 sts

Rnd 21 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 78 sts

Rnd 22 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 11 sts. 2 hdc in the next st. (1 hdc in ea of the next 12 sts, 2 hdc in the next st) 5 times. Join with a sl st. – 84 sts

Rnd 23 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 84 sts

Rnd 24 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 12 sts. 2 hdc in the next st. (1 hdc in ea of the next 13 sts, 2 hdc in the next st) 5 times. Join with a sl st. – 90 sts

Rnd 25 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 90 sts

Rnd 26 (forward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 90 sts

Rnd 27 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 90 sts

Rnd 28 (forward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st.  – 90 sts

Rnd 29 (backward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in the next 3 sts. 2 hdc in the next st. (1 hdc in ea of the next 4 sts, 2 hdc in the next st) 5 times. (1 hdc in ea of the next 14 sts. 2 hdc in the next st) twice.  (1 hdc in ea of the next 4 sts, 2 hdc in the next st) 6 times. Join with a sl st. Sl st in the BLO of the next st.  β€“ 104 sts

The curve of the hat is offset again by concentrating the increases on 2/3rds of the hat

Rnd 30 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 11 sts. 2 hdc in the next st. (1 hdc in ea of the next 12 sts, 2 hdc in the next st) 7 times. Join with a sl st. – 112 sts

Rnd 31 (backward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 12 sts. 2 hdc in the next st. (1 hdc in ea of the next 13 sts, 2 hdc in the next st) 7 times. Join with a sl st. Sl st in the BLO of the next st. – 120 sts

Rnd 32 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 13 sts. 2 hdc in the next st. (1 hdc in ea of the next 14 sts, 2 hdc in the next st) 7 times. Join with a sl st.  β€“ 128 sts

Rnd 33 (backward): Ch 1 (does not count as first hdc). 1  hdc in the same st. 1 hdc in ea of the next 14 sts. 2 hdc in the next st. (1 hdc in ea of the next 15 sts, 2 hdc in the next st) 7 times. Join with a sl st. Sl st in the BLO of the next st. – 136 sts

Rnd 34 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 15 sts.  2 hdc in the next st. (1 hdc in ea of the next 16 sts, 2 hdc in the next st) 7 times. Join with a sl st. – 144 sts

Rnd 35 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 144 sts

Rnd 36: Sl st in ea st around.

Weave in all ends to finish. I used some spare chenille yarn and a larger hook to double chain a thin hat band. These hats would be really cute with extras like felted leaves or buttons – I may have to make some more!

Instructions: Type B

Rnd 1 (back): Ch 1. Hdc 8 into magic ring. Join with a sl st. Sl st in the BLO of the next st.

Rnd 2 (forward): Ch 1 (does not count as first hdc). 1 hdc in ea st. Join with a slip st to first hdc of the rnd. – 8 sts

Rnd 3 (back):  Ch 1 (does not count as first hdc). 2 hdc in the same st. 2 hdc in the next st. 1 hdc in ea of the next 4 sts. 2 hdc in ea of the next 2 sts. Join with a sl st. Sl st in the BLO of the next st.  β€“ 12 sts

Rnd 4 (forward): Ch 1 (does not count as first hdc). 2 hdc in the same st. 2 hdc in the next st. 1 hdc in ea of the next 8 sts. 2 hdc in ea of the next 2 sts. Join with a sl st.  β€“ 16 sts

Rnd 5 (backward): Ch 1 (does not count as first hdc). 2 hdc in the same st. 2 hdc in the next st. 1 hdc in ea of the next 12 sts. 2 hdc in ea of the next 2 sts.  Join with a sl st. Sl st in the BLO of the next st.  β€“ 20 sts

Rnd 6 (forward): Ch 1 (does not count as first hdc). 2 hdc in the same st. 2 hdc in the next st. 1 hdc in ea of the next 16 sts. 2 hdc in ea of the next 2 sts. Join with a sl st.  β€“ 24 sts

Rnd 7 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. Sls t in the BLO of the next st.  β€“ 24 sts

Rnd 8 (forward): Ch 1 (does not count as first hdc). 2 hdc in the same st. (2 hdc in the next st) 5 times. 1 hdc in ea of the next 12 sts. (2 hdc in the next st) 6 times. Join with a sl st.  β€“ 36 sts

Rnd 9 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. Sl st in the BLO of the next st. – 36 sts

Rnd 10 (forward): Ch 1 (does not count as first hdc). 2 hdc in the same st. (2 hdc in the next st) 8 times. 1 hdc in ea of the next 18 sts. (2 hdc in the next st) 9 times. Join with a sl st.  β€“ 54 sts

Rnd 11 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. Sl st in the BLO of the next st.– 54 sts

Rnd 12 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st, 1 hdc in ea of the next 7 sts. 2 hdc in the next st. (1 hdc in ea of the next 8 sts, 2 hdc in the next st) 5 times. Join with a sl st. – 60 sts

Rnd 13 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. Sl st in the BLO of the next st. – 60 sts

Rnd 14 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 8 sts. 2 hdc in the next st. (1 hdc in ea of the next 9 sts, 2 hdc in the next st) 5 times. Join with a sl st. – 66 sts

Rnd 15 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. Sl st in the BLO of the next st.– 66 sts

Rnd 16 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 9 sts. 2 hdc in the next st. (1 hdc in ea of the next 10 sts, 2 hdc in the next st) 5 times. Join with a sl st. – 72 sts

Rnd 17 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. Sl st in the BLO of the next st.– 72 sts

Rnd 18 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 10 sts. 2 hdc in the next st. (1 hdc in ea of the next 11 sts, 2 hdc in the next st) 5 times. Join with a sl st. – 78 sts

Rnd 19 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. Sl st in the BLO of the next st. – 78 sts

Rnd 20 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 11 sts. 2 hdc in the next st. (1 hdc in ea of the next 12 sts, 2 hdc in the next st) 5 times. Join with a sl st. – 84 sts

Rnd 21 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. Sl st in the BLO of the next st. – 84 sts

Rnd 22 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 12 sts. 2 hdc in the next st. (1 hdc in ea of the next 13 sts, 2 hdc in the next st) 5 times. Join with a sl st. – 90 sts

Rnd 23 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. Sl st in the BLO of the next st. – 90 sts

Rnd 24 (forward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 90 sts

Rnd 25 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. Sl st in the BLO of the next st. – 90 sts

Rnd 26 (forward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st.  – 90 sts

Rnd 27 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. Sl st in the BLO of the next st.– 90 sts

Rnd 28 (forward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st.

Resume pattern at Round 29 for Type A and complete the instructions from there onward.

For more Halloween themed crochet patterns and tutorials, check out these:

Crochet Pumpkin tutorial
Jack-O-Lantern Mushroom crochet pattern
Candy Corn Baby Hat

And of course, I have tons more free patterns available – if you would like to check them out, visit my Free Pattern page!

❀ MF

46 thoughts on “Hedge Witch Hat Pattern

  1. Hey, so good pattern, however it is way too big for my head (i dont really have alot of hair) any tips on how to make it a bit more snug?

    Like

    • Certainly! You can work this pattern up to Round 19 – depending on the yarn and gauge, this round might be big enough (I’m making one right now with double strands where I stopped increasing at Round 19). Or, you can work to Round 21 and then stop increasing, or work to Round 23 and then stop increasing. Ending increasing at these rounds will give you more size options (the fewer rounds with increase the smaller it will be). After that, you can skip to Rounds 25-28 to finish the length of the hat, or add a few rounds there without increasing if the hat isn’t long enough (since you skipped earlier rows). Then you can work the brim! πŸ™‚

      Liked by 1 person

  2. Pingback: Costume Mega Tail | Morale Fiber

  3. Pingback: Switchback Join Tutorial | Morale Fiber

  4. …hey chicky…I love this pattern and I am in the process of making it…but im only a beginner. so I stopped increasing in round 23 as yooh stated which left me at 84 sts. so now im at round 29 and I don’t know how to continue from there as far as figuring out how many stitches to increase to the end of the pattern…pleeeese help me..
    thank yooh
    jan

    Like

    • Hi Jan! What I would do is add one more round (or use round 29) to add just 6 more stitches to your total to bring the hat up to the 90 stitches you should have in round 28. That way the majority of the hat is your size but you can add the the stitches now so that increased size becomes part of your brim instead of your hat band size. Then you can continue with your increasing as normal πŸ™‚

      Liked by 1 person

  5. The Switchback Join Tutorial has Round 2 & even rounds as the backward leaning rounds. This pattern has Round 1 & odd rounds as the backward leaning round. For this pattern, at the end of Round 1, should I join with a slip stitch, then skip one more stitch and add an extra at the end of the Round r to make up for it or at the end of Round 1, join by working a slip stitch in the first st, ch 1 & hdc in the same stitch to begin next Round 2?

    Like

    • Yes, the pattern of backward & forward on this pattern is different than the Demo – the pattern written should be right, but I’ll double check. Honestly it wouldn’t make a big difference either way for this design, as long as you alternate backward and forward rounds in some way πŸ™‚

      Liked by 1 person

      • Thank you much! Got it.
        You told Amanda Richard β€œAfter that, you can skip to Rounds 25-28 to finish the length of the hat”
        Do you mean to literally skip Rounds 20-24 by doing Round 19 & then Round 25 immediately after that
        OR
        continue making all of the rounds, just skipping the increases that are in Rounds 20-24?
        Also, what size hook are you using for double strands?
        Take care!

        Like

      • “After that, you can skip to Rounds 25-28 to finish the length of the hat, or add a few rounds there without increasing if the hat isn’t long enough (since you skipped earlier rows).”

        I think I meant literally skip them, lol, but that’s more viable if you are working up to Rounds 21 or 23. If you stop increasing at Rnd 19 you’ll need more rounds that just work even without increasing if the hat isn’t long enough. Sorry it took me some time to decipher what I was talking about πŸ˜€ Hopefully that makes sense. For the double stranded hat I remained at the hook size recommended for this pattern, and just struggled along with a too-small hook.

        Like

  6. Pingback: Going the Distance | Morale Fiber

  7. hi! i’m considering making one of these, but i don’t have the right yarn. I was wondering about how much you used, so i can buy enough skeins πŸ™‚

    Like

  8. Pingback: Hedge Witch Hat PDF | Morale Fiber

  9. Hi! Just wondering how the switchback join works with this pattern, as most of the backrounds start with Ch1 then HDC in same stitch, when the switchback start calls for Ch1, skip next stitch, those two instructions don’t seem to have a way to work together, unless I’m missing something obvious πŸ˜…
    Thanks in advance for your clarification, I LOVE this pattern and really REALLY wanna make it

    Like

    • Hi Moire! That’s a great question – the two do work together, I’ll try to explain a little here! πŸ™‚ The Switchback join works with alternating Backward and Forward rounds, of course. Each backward round starts with Ch 1, which doesn’t count as the first stitch, then 1 hdc in the same stitch. That’s the round that is worked like a normal crochet round.

      The forward round starts by making an extra slip stitch in the very first stitch of the round. So you slip stitch to finish & join the backward round, and then make another slip stitch in the back loop only (BLO) of the very next stitch, which is the first stitch of the next round (would have been the second stitch if it had been a backward round). So your slip stitch join occupies & replaces what would have been the first stitch of the round, and you start the round by chaining and hdc in the next stitch. Then at the end of the round, you make your final stitch in the slip stitch join, which now counts as the last stitch instead of the first πŸ™‚

      The instructions for this process are written a little clearer in the PDF version of the pattern than in the blog post – I’ll have to get that updated soon! I hope that helps and let me know if you still have questions!

      Like

  10. Since the update in the pattern, I’m having trouble. Around row 32, I seem to have extra stitches at the end of the row. Can some please verify if I’m doing something wrong, or if there is a mistake in the pattern?

    I also found that I can’t figure out the switchback join technique, due to the mistake in the tutorial. Can you upload a fixed version without the mistake so I can figure it out, please? Thank you!

    Like

    • Also, were you working Type A or Type B?
      I checked up on the tutorial and I think maybe you are referring to the “mistake” at the first round, here’s the text:
      “Rnd 1: You can and probably should count this as the first round, meaning it will be an A or backward leaning round, although I have to admit that I didn’t – oops. That will set me off-center slightly but it won’t matter much. ”
      This isn’t really a mistake one way or the other, you can either count that round or not count it as your first forward or backward round. It really doesn’t matter, as long as you alternate forward and backward rounds, your seam will stay straight πŸ™‚ If that’s not the part you’re having trouble with, let me know!

      Like

  11. Wow! What a fun pattern to make. However I am confused about the final rows for version A:

    Rnd 34 (forward): Ch 1 (does not count as first hdc). 1 hdc in the same st. 1 hdc in ea of the next 15 sts. 2 hdc in the next st. (1 hdc in ea of the next 16 sts, 2 hdc in the next st) 7 times. Join with a sl st. – 144 sts

    Rnd 35 (backward): Ch 1 (does not count as first hdc). 1 hdc in ea st around. Join with a sl st. – 136 sts

    How can it end with 136 stitches when the prior row has 144? I’m sooo close to being done lol but can’t figure out how to lose those 8 extra stitches.
    Thank you

    Like

  12. Pingback: Witch Hat Pattern | Morale Fiber

  13. Would this pattern work JUST as well β€œin a continuous round with NO join And no beginning chains? Will a seam show with this method?

    Like

    • Hi Deborah! You could definitely do this pattern in the round without joining, but the problem with doing it that way is that crochet stitch tends to lean toward the direction of the dominant hand. So if you worked the entire pattern without the switchback join, the way that the shaping lines up will slant further and further right for every round (if you’re right handed) and your hat won’t have the bulges & bends all occurring in the same place at the back of the hat.

      However, as I mentioned in the notes, you can still skip the switchback join and do one of the regular joins for this hat if you really prefer and end up with just a little more crazy-looking hat! πŸ™‚ A continuous join would get rid of the seam, too πŸ™‚

      Like

  14. I made it, its xute, not fully sure if I did it right. How do you make a hat band? Was there turns when you went to the next row? Was there a full row of slip stitch in BLO parts of the pattern?

    Like

    • Hi Caitlin! I made the hat band by chaining a length of stitches and then working back down the chain in single crochet – I just estimated the amount needed by holding it up to the hat πŸ™‚
      This piece is worked continuously in the round, so there are no turns in the pattern or any rows that consist entirely of slip stitches – if your hat isn’t looking quite like the picture, you may have missed that Switchback Join method is required to make the hat look like the picture (it’s mentioned in the notes and there’s a tutorial link for how to work this join).
      Though the method is written into the pattern instructions, it may take a full viewing of the tutorial to fully understand how it should be working in this project. πŸ™‚ Thanks and I hope that helps!

      Like

    • Oh so cute! I’m not sure about sizing it down by the stitch counts, but I’ll bet you can get a small one easiest by sizing down your hook and yarn! I saw someone on Instagram get a pretty small one by using a #3 weight yarn instead of a #4 weight πŸ™‚

      Like

  15. Pingback: 25 Free Crochet Hat Patterns to Make, Wear and Gift - love. life. yarn.

    • Hi Dani! You’ll have to work extra rounds of increases after Round 24. To do that, you add 6 more stitches each round as you had already been doing, but do it until the inner brim of the hat feels big enough to fit the intended head πŸ™‚ After that, continue on with the Rounds (formerly 25-28) that don’t increase. The next part will require some math.

      However many stitches you have, divide by 3 and multiply by 2 – you will want to concentrate the increases on 2/3rds of the hat to get the swayed brim of the original on Round 29. If you don’t care to get that specific, you can skip straight to the next part, which increases at a flat rate as before, adding 8 stitches per row evenly placed, until the flat brim is as big as you want.

      You’ll probably end up having to smudge the math a little but I hope that helps!

      Like

  16. this may sound a bit dumb… but in the alternating rows are you meant to also switch the direction of the crochet like in a scarf? my join seems to be migrating to one side is all.

    Like

    • Hi Danielle- not a dumb question at all! You won’t be turning like for a back-and-forth set of rows though, you’ll be continuing to work all in the same direction. The alternating join method (Switchback join) only refers to moving the starting stitch one stitch forward, or leaving it where it would normally be. If your join is skewing to one side more heavily, your tension may be causing it to not be balanced and that can be corrected by changing how much you switch back and forth.

      So if your join is leaning heavily to the side of your dominant hand, do more joins that move the starting stitch one stitch foward. If your joins are leaning to the side of your non-dominant hand, do more joins that do not move the starting stitch forward πŸ™‚ Hope that helps!

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s