Amanita Muscaria Mushroom Pouch

Maybe creepy poison fungus seems more like an autumn thing, but there is some argument for the seasonality of the crochet project I have to share today!

It wasn’t meant to be seasonal – I created the Amanita Mushroom Pouch tutorial & free crochet pattern because I had requests to make a pattern for the above older photos from my Jack-O-Lantern and Morel Mushroom pouch blog posts. But since we’re on the subject, here’s an article about the connection of amanitas to winter tradition in Northern Europe and Russia. I’ve read other articles in the past, making wilder and less well-researched claims, which are fun if speculative.

Whether or not you buy that some of our holiday traditions are derived from hallucinating on mushroom toxins, the Amanita Muscaria Mushroom Pouch is a pretty cute little project to make curled up inside on a winter’s day, and look adorable tucked in the branches of the tree ❤

I’ve been making these for a few years and I’m glad to have finally created a pattern for them 🙂 Happily, I have BOTH a written pattern and a video tutorial (see my Youtube Channel or find it at the end of the pattern below)! Huzzah!

Amanita Muscaria Mushroom Pouch

4.5 mm Hook
#4 Worsted weight yarn in white and red
Tapestry needle

Stem Instructions:
Make Magic Ring.
Rnd 1: 6 sc into the ring.
Rnd 2: 2 sc in ea st – 12 sts
Rnd 3: Working in back loop only, 1 sc in ea st around – 12 sts in BLO
Rnd 4: *Sc in the next 2 sc, sc2tog. Rpt around – 9 sts
Rnds 5-6: 1 sc in ea sc.

Rnd 7: Working in the back loop only (BLO), 1 sc in ea sc

Rnd 8: Working in the front loop only left from Rnd 7, *1 hdc and 1 sc in the next st, 1 sc in the next st. Rpt around.

Rnd 9: Skipping over Rnd 8 and continuing into the sc stitches of Rnd 7, 1 sc in ea sc.
Rnds 10-13: 1 sc in ea sc around

Sl st in the next few sts, do not tie off. Begin crochet chain loop. Chain 100-125. Once chain is complete, slip stitch on the opposite side of the stem from the beginning of the chain. Add a few more slip sts around to secure. Cut yarn and tie off.

Cap Instructions:

With red yarn, make Magic Ring.
Rnd 1: Ch 2. 10 hdc into the ring.
Rnd 2: Ch 2. 1 hdc in the same st. 2 hdc in the next st. *1 hdc in the next st, 2 hdc in the next st. Rpt around

Rnds 3-4: 1 hdc in ea st around.
Rnd 5: 1 sc in ea st around.

Sl st in the next few sts to secure, then cut yarn and tie off. Weave in all ends on the stem and cap using a tapestry needle and scissors.

With a length of white yarn, thread the tapestry needle. Insert needle from under the cap to the top, leaving some tail for sewing in. The spots are made from working french knots, an embroidery technique that wraps yarn around the embroidery needle before completing the stitch. For instructions on this part, see the video at 17:00.

Video Tutorial

Also, for fun, here’s me in an Amanita Muscaria Mushroom hat, which is made with french knots bespeckling my Sweetheart Beret crochet pattern, a.k.a the Forest Girl Beret ( the antlered version).
UPDATE 8/2020: This beret pattern actually now comes in full-format PDF form that includes specific instructions for a mushroom hat – find more info on this blog post!

Well, that’s all the pictures of yarn mushrooms I’ve got… Just kidding, it isn’t. But that’s all I’m going to cram into this post. I hope you all have a super safe and lovely holiday season ❤


PBT: One Piece Circular Pocket

This post is part of a series of tutorials on how to create your own unique crochet pixie pocket belt – to read more about this series visit the Intro page.

One Piece Circular Pocket

Most of the crochet utility belts I make have circle pockets – I love their potential as a canvas for other shapes like mandalas, simple embroidery, or shell flower petals. Plus, I’m just really into circles.

While I’ve created a tutorial for circle pockets that utilize two flat circle shapes sewn together, I often prefer to create them in a single piece – this tutorial shows how!


Begin by working a colorful, non-continuous circle as shown in this section of the tutorial series. Shown here is my version for the belt I’ve been working on, “Dogwood”.


As you can see, I’ve got some crazy stuff going on in there, including some overlay stitches and textural bobbles, plus a resin cabochon that I appliqued on with a crochet cover. But the basic structure is the same, using regular increases to make a flat circle and going up to 60 or so stitches, which means following in pattern until you Inc on 10 (see Circle Pockets Part 1 for more on creating flat circles).


Once I reach my desired size, I prepare to shape the circle. To do this, I’m going to add a few rows of sc even in the round, meaning I’ll just crochet around the circle without adding any increases or working any joins. This will add depth to your circle so that the pocket is rounded and not flat. BUT, you have to keep in mind you’ll need an opening in your pocket, so at some point you’ll chain a number (I think I did around 13-15) and skip the same number of stitches before continuing to crochet.



On the next round, single crochet right over the chain as normal. Now you have the opening worked out, so you will work a few more rounds of sc even, then begin to decrease at the same rate that you increased in the front.



If you plan on adding a button fastening, don’t forget to crochet either a loop or a buttonhole into one of the rounds behind the opening on the back of your pocket! I almost forgot, which is why my loop is larger and set further back 😉

Since my pocket went up to “Inc on 10” I’ll start shaping the back of my pocket by decreasing on 10, using the same counting strategy as the increases:

Dec on 10 (or count out 9 stitches, then use the 10th and 11th sts to work a sc decrease)
Dec on 9 (count out 8 sts, use the 9th and 10th sts to dec)
Dec on 8 (etc…)


The back of the circle pocket will start to close up. When you can’t decrease anymore, you’ll need to cut a long yarn tail and tie off your stitches. Thread the yarn tail on a tapestry needle and secure the closing circle by stitching through it back and forth a few times.


Weave in all your ends, and sew on a button or fastening, beads, or anything you like!


Hope you enjoyed this little bonus edition of the Pixie Belt Tutorial – keep sending me pictures because I love seeing what you make! Hit me up on my Facebook page:
Morale Fiber on Facebook




Glow-in-the-Dark Mushroom Free Pattern

Welcome to day two of the Halloween Special! Day one featured a handspun pumpkin (handspunpkin?) which was more of a description than an actual tutorial, but today you’ll never guess what I’ve got here.

It’s glow-in-the-dark. It’s a mushroom. It’s a FREE PATTERN!


This spooky fungus is cute and quick and has a little secret pouch inside the hollow stem, covered by the moveable cap that is strung on the chain loop band.


The glow-in-the-dark yarn I use here is awesome, from a company called Gert’s Glow House. They don’t always have it in stock though, so you might have to range afar to find it. Since gauge isn’t critical on this project, you can also easily substitute other glow or neon yarns if you can’t get that exact type.

FUN FACT: There is a species of mushroom called the Jack-o’-Lantern Mushroom (Omphalotus olearius) that really does glow in the dark! That’s what I named these little pockets after 🙂


Jack-o’-Lantern Mushroom Pouch

3.75 mm hook
Gert’s Glow House Glow-in-the-Dark Yarn (50 g, 4-ply fingering weight) – 1 skein
Tapestry needle & scissors
Stitch Marker

Gauge is not critical

Pattern uses 2 strands of yarn held together, so you will need to either split your skein in half, work from both ends, or use 2 skeins

Rounds are worked continuously without joining, so mark the first stitch of each round with a marker to keep track.

Helpful Tutorials: 
Magic Ring, Back Loop Only


To begin, take 2 strands and make a Magic Ring.
Rnd 1: 6 sc into the ring. Pull the ring closed tightly. – 6 sts
Rnd 2: 2 sc in each of the next 6 sc. – 12 sts
Rnd 3: Working in the back loop only, 1 sc in ea of the next 12 sts. – 12 sts
Rnds 4 -13: Work in both loops, 1 sc in ea of the next 12 sts. – 12 sts

You can add extra rounds here if you want a longer stem!

Rnd 14: Sl st in the next 2 sts. Ch 100 and join with a sl st on the opposite side of the round. Sl st in the next 2 sts to secure. Cut yarn and tie off.


To begin, make Magic Ring
Rnd 1: 10 sc into the ring. Pull the ring closed, but not tightly – there should be a circle left open big enough to get your hook through later. -10 sts
Rnd 2: *1 sc in the next st, 2 sc in the next st.  Repeat from * around. – 15 sts
Rnds 3-4: 1 sc in ea of the next 15 sts. – 15 sts
Rnd 5: *1 sc in ea of the next 2 sts, 2 sc in the next st. Rpt from * around. – 20 sts
Rnds 6-7: 1 sc in ea of the next 20 sts. – 20 sts
Rnd 8: Sl st in ea st around. Cut yarn and fasten off.

Insert hook from the top of the cap to the underside and catch the 100-st long chain you made for the stem. Pull the chain through so that the cap fits over the top of the stem.


Tighten the hole at the top of the cap to the tension you like (remember you still want the cap to be able to move up and down the chain).

Weave in all ends.

To get a really good glow going, leave your new Jack-o’-lantern mushroom on the windowsill to charge in the sunlight (or moonlight).


The glowing in this picture is enhanced by my camera exposure setting, but still, they’re pretty dang glowy.


These are so handy for carrying pocket money, chapstick, pretty rocks, etc… or just for looking cuter than heck.