It’s finally time! I’ve received many requests over the last few years to design a hood for my Lotus Duster free crochet pattern, and it’s been on my to-do list for long enough – today we debut the hood addition to this design! 😀
The hood is partially made, then inserted into the main pattern rather than added after the entire thing is finished, so if you are working the Lotus Duster you will be adding the hood after Round 22, then continuing with the main pattern from there and working over the hood brim in addition to the rest of the garment. Also, I made the version pictured here sleeveless (because I wanted to wear it this summer) and I made a few adjustments to the sizing as well, which are explained in the instructions 🙂
If you like these patterns and want the portable, printable, ad-free version, good news! The Hood Tutorial is now included as a bonus PDF along with the PDF version of the Lotus Mandala Duster pattern, available in my Etsy Shop , Ko-fi Shop, and Ravelry Pattern Store! And don’t forget my offer for bundled patterns with my new pattern discount codes:
15% off of 2: MF15OFF
20% off of 3-4: MF20OFF
25% off of 5-6: MF25OFF
30% off of 7+: MF30OFF
The pattern given for the Hood is more of a tutorial and doesn’t include specific stitch counts like the main Lotus Duster pattern does. I also used a random mishmash of yarns, some slightly bigger than I would normally use for this design, which makes a difference in sizing and gauge, etc – so I left the hood instructions open with modifications for individual gauge and preference. I considered using the standard yarn that I use for the main pattern, but I just really wanted to make this crazy thing using all these crazy yarns!
The majority of the yarns used in this example are either upcycled by me from old sweaters (see my detailed tutorial on how to recycle sweater yarn) or rescued from the thrift store. If you liked this project, give a girl a fave over on the Ravelry project page for this design!
Oh, and those leafy wrap bracelets I am wearing are from another FREE crochet pattern of mine, the Ivy Crown garland.
Lotus Hooded Duster
Materials: 5.50 mm hook
Extra yarn – I would estimate the hood addition requires 300-500 yards of yarn more than the standard pattern. Please refer to the main pattern for more info on materials needed, gauge, etc.
Notes: As mentioned, I made a few tweaks to the sizing of this sleeveless duster to get the look I wanted. I started working the main pattern in size Small, then added length and width by working some of the extra rows suggested in the Large size – but not all of them, so the size came out more like a Medium.
Instructions
Work the Lotus Duster 2.0 pattern through to Round 21.
On Rnd 22 I made an adjustment to the amount of double crochet that I worked across the chain loop that creates the armhole opening.
“22. Ch 3 – counts as first dc. 1 dc in the next dc (3 dc in the next ch-1 space, 1 dc in ea of the next 2 dc) 9 times. 3 dc in the next ch-1 sp, 1 dc in the next dc. 1 dc in ea of the next 30, 33 ch sts. 1 dc in the next dc (1 dc in the next ch sp, 1 dc in ea of the next 2 dc) 9, 13 times**. 1 dc in the next ch sp, 1 dc in the next dc. 1 dc in ea of the next 30, 33 ch sts. 1 dc in the next dc (3 dc in the next ch-1 space, 1 dc in ea of the next 2 dc) 63, 65 times. 3 dc in the next ch-1 sp, join with a sl st to the 3rd ch of beg ch-3. – 460, 488 sts”
Instead of working 1 dc in each of the chain stitches made for the armhole loops (making 30 total dc over each armhole) I worked 20 total dc into the armhole loop itself, not the stitches. This means that the stitches can stretch across the loop made by the chains and are not anchored to the stitches themselves – to do this, just insert the hook underneath the chain loop to work your stitches across (do not insert your hook into the actual stitches, just the space underneath the chain).
I forgot to get an actual picture at this stage, so this one is from a little later in the pattern. Still, check out how the stitches are arranged across the armhole loop space – this accomplishes a slight tightening at the bust and shoulder area and makes room for the extra draping material that will be added by the presence of the hood. If these step seems confusing or you are having trouble with sizing, it’s 100% okay to skip this step – it’s not a crucial adjustment. I just made this change because it helps keep all that pretty lacey material tucked around the shoulders for a better fit.
So with that in mind, finish Round 22 as written with or without the armhole adjustments. Once Rnd 22 is complete, set the main body of the duster aside to begin the hood.
Hood Instructions
Using the 5.50 mm hook and your yarn of choice, Chain 35.
The length you chain depends on your gauge – if you hold the chain starting at the nape of the neck, it should be long enough to reach the back of your head. If 35 is too short, chain more.
Row 1: Dc in the 4th ch from hook, ch 1, sk next st. (Dc, ch 1, sk next st) 14 times, or however many times you need to reach the second to last stitch of the chain. Dc, ch 1 in next st. In the last st of the chain, work (Dc, ch 1) 3 times. Rotate the piece so that you are working into the bottom of the chain stitches, creating a chain with stitches on both sides. Dc, ch 1 in the next st, sk next st. (Dc, ch 1, sk next st) 14 times. Dc in next st. Dc in the final st.
Row 2: Ch 4 (counts as first dc + ch 1), turn. (Dc in next ch -1 space, ch 1) 16 times. (Dc, ch 1) twice in ea of the next 2 ch-1 spaces. (Dc in the next ch-1 space, ch 1) 16 times. Dc in the final dc of the previous row.
The instructions in bold create two increase spaces at the tip of one end of the piece. Through the next part, you will work the same kind of increase in each of these two increase spaces on every row – so it’s helpful to mark them!
Row 3: Ch 3 (counts as first dc), turn. (Dc in the next ch-1 space, ch 1) 17 times. (Dc, ch 1) twice in the next space. Dc, ch 1 in the next space. (Dc, ch 1) twice in the next space. (Dc in the next space, ch 1) 16 times. 1 dc in the final ch-1 space, 1 dc in the final dc of the previous row.
Row 4: Ch 4 (counts as first dc + ch 1). (Dc in the next ch-1 space, ch 1) 18 times. (Dc, ch 1) twice in the next space. Dc, ch 1 in each of the next 2 spaces. (Dc, ch 1) twice in the next space. (Dc in the next space, ch 1) 18 times. Dc in the final dc of the previous row.
Keep working in this same manner, placing increases at the two increase points on every row, until your hood has 11 total rows (or until the hood is tall enough to reach the top of your head).
The next few rows skip the increases to add depth to the hood without adding more height. You can repeat the next two rows as many times as you like to get the depth of hood that you want/need, but remember that since there are still 15 rounds left in the main pattern that will add height and depth to the hood, so you really don’t need this part to be a fully functioning hood yet.
Row 12: Ch 4 (counts as first dc + ch 1). (Dc in the next ch-1 space, ch 1) in each space across. Dc in the final dc of the previous row.
Row 13: Ch 3 (counts as first dc). (Dc in the next ch-1 space, ch 1) across. 1 dc in the final ch space, 1 dc in the final dc of the previous row.
Once your hood addition is completed, cut your yarn and tie off. Now we are going to attach the hood to the work-in-progress main body of the duster.
My hood addition when finished by itself is about 20″ across the bottom, and 12″ at the highest point.
Attaching the Hood
On the main duster, use a stitch marker to mark the central dc between the armholes. I do this by counting how many v-stitches are in the row below, then finding the central v-stitch or space between v-stitches – the double crochet above will be the central point. Align the hood’s flat edge with this point, matching the end of the foundation chain to the middle point marked on the duster.
Attach yarn, insert hook through both the vest and the hood at the central point. Work a sc in ea dc through the hood, working 2 attaching stitches for the side of every DC at the end of a row. This was 25 stitches for me to get to the end of the hood.
Count out the amount of sts needed for the other side. Cut yarn and reattach at this point, then work toward the central point using the same strategy to attach.
Of course, you can always just whip stitch the hood onto the main duster if using a crocheted method of attaching seems like too much bother. I prefer a stitched seam here because the hood is going to be resisting against the weight of the rest of the duster (which is not light) and I want the seam to be strong and not stretch too much.
Once your hood is attached in whichever fashion you prefer, cut your yarn and tie off. It’s time to pick back up where we left off on the main body of the duster at Round 23. Only now, we will be working all the rest of the rounds across the brim of the hood as well as around the main body.
“23. Ch 3 – counts as first dc. (Sk next three sts, 1 dc in the next st. Ch 3, 1 dc in the same st) 114, 121 times. Sk next three sts, dc in the next st, ch 1. Hdc in the 3rd ch of beg ch-3 to join.”
Round 23 creates V-stitches all around the garment – to work the first round that includes the hood, work a V-stitch over the arm opening stitches as instructed…
Then work a V-stitch in every other ch-1 space around the brim of the hood addition.
Continue the round across the entire brim of the hood, and then around the main body as well, using the instructions given. Remember that because of the hood addition, your stitch counts will not be the same as given in the main pattern.
Once Round 23 is complete, all remaining rounds can be worked as written in the main Lotus Duster pattern, just working around the entire body including the hood! One more consideration is the half-rounds at Rnd 35 and 36 – because you have added a hood, you’ll have to recalculate what amount of stitches constitutes the top half of the garment and then work the half-rounds across that amount of stitches, not the amount given in the main pattern.
To calculate this number, count the total number of stitches in Rnd 34, then divide that number by half. Beginning with the Rnd 34 join at the side of the duster, count out your V-stitches that equal half of the total. Mark the final stitch of this set, then work Row 35 and 36 only on that portion following the instructions given. For my duster vest, half of the total equalled 224 V-stitches.
Once the garment in completed, I cut the yarn and wove in the ends. I added the slip stitching necessary to anchor the ties as shown in the main pattern, then added two braided ties on each side.
Since I left this version sleeveless, I finished the armholes with a row of dc around the inside.
I really love this particular version of the Lotus Duster – the lack of sleeves makes it a good garment for warmer weather, but the hood and the length make it mysterious and costume-y enough to be a stunning festival piece! In my tradition of naming these after female singer songwriters, I’m calling this baby “Florence.” <3
The polymer clay horns and woodland tree spirit pendant I am wearing in this shoot came from my amazing friend Wendy Davies from Dark Pony Art – please check out her art and give her a like on her Facebook Page!
If you like my designs, you can head over to my Facebook Page too and hit that follow button!
As always, I’m filled with gratitude for everyone who likes, comments, shares, and creates my designs! I can’t help but remember a time when where I am at now seemed beyond my wildest imaginings <3 And it’s all possible because of you magical beings out there who support me, thank you so much <3 I am honored to create with you!
-MF
