Last summer I designed a simple beginner bralette-style crochet top with the aim of creating a fun basic piece that could be altered easily – the Basic Bralette Tutorial! Since then, it’s been on my list to create some modified versions, especially one that is better for curvier busts 🙂
Update! 7/17/2019: This modification and the pattern for the original are now both available in one downloadable, printable, ad-free PDF! Get more info by clicking here!
The flattish triangle style cups are great because they can be expanded to any size, but to fit best over bigger chests they need some edging to curve them inward a little – which is what we’re doing today with the Curvy Bralette Tutorial. <3 <3
You can find this design linked in the Ravelry database, or on my Pinterest crochet board – so throw me a like or a pin if you enjoy it 🙂
Curvy Bralette Tutorial Pattern
3.50 mm hook
#4 weight cotton yarn (although you can make it with any weight yarn / hook size combo as long as you know your gauge) 1-3 skeins depending on size made
Scissors & Tapestry Needle
Band Size (measured around the rib cage just under the bust): For example, my measurement would be 32”
Measurement A : (Band size “ / 4) ” = Length of each side of completed triangle cup ( My example would be [32 / 4] = 8”). Therefore, my Measurement A = 8″
Measurement B: (Measurement A) – 2 = My Measurement B would be 6”
You can have differing gauges for this project, as long as you know what your gauge is in order to achieve the right measurements. Follow the gauge-finding instructions in the Basic Bralette post.
To begin, follow the instructions for the Basic Bralette from the two triangle cups all the way through the Row 3 repeats of the band, then stop – do not tie off.
- Ch 4 (counts as dc + ch-1), rotate the piece so that you are working into the side of the stitches on the row ends. (Dc into the side of the next st, ch 2, sk next st) 2 times. Dc into the side of the last stitch.
2. Ch 4 (counts as dc + ch-1). Rotate your piece so that you are working into the next un-edged side. Dc in the same stitch, ch-1 to turn the corner.
3. (Sk next 2 sts, dc in the next st, ch-1) repeat across the row until you reach the corner of the cup.The ch-1, skip 2 repeat here reduces the overall length of the edge along the sides and cup to help it curve inward to fit a curvy bust – if this is too tight for you, you can do ch-2, skip 2 instead in these instructions and in the instructions following.
4. Sk next 2 sts and the dc on the bottom row of the cup. Dc into the top of the first unworked dc on the side of the cup, as shown. Ch 1. (Sk next 2 sts, dc in the next st, ch-1) along the side of the cup.
5. (Dc, ch 1) 2 times in the top corner of the cup, in the ch-2 space. Depending on how many dc’s you have in each side of the cup, you might want to place a dc, ch-1 in the stitches right before and after this space. Since this is where the ties will go, it isn’t good for it to be too tight.
6. (Sk next 2 sts, dc in the next st, ch 1) along the next side of the cup. A few stitches before the end, skip to the next cup, making sure there are an equal amount of skipped stitches on either side so it is mirrored. The more you skip, the tighter the cups will be, so you can customize based on your size.
7. Repeat the same process over the other cup’s 2 sides, mirroring the first half: Work 2 (dc, ch 1) repeats in the other cup’s top corner, (dc, ch 1, sk 2 sts) down the side skipping the same amount of stitches at the corner, then across the top of the band. Dc, ch 2, dc in the same stitch at the corner. (Ch 2, sk next st, dc in the side of the next dc) across the row ends at the side of the band. Dc in the last dc -I added an extra dc in this stitch too to make it more even with the bottom band.)
8. Ch 4 (counts as first dc + ch-1). Turn, (dc in the next ch space, ch-1) across the last row of edging until you reach the corner. (Dc, ch 1) 3 times in the corner space.
9. (Dc in the next space, ch 1) all across the last row of edging in the bralette, placing (dc, ch 1) repeats at the top corners of the cups. I left the top corners free, because I used t-shirt yarn ties for this one, but if you’re crocheting your ties, add them on by chaining the length you want, then slip stitching back down the chain to return to the top corner of the cup. The Ties need to be long enough to cross over the back, and criss-cross the openings on the band sides to adjust it:
10. To make it strappy: after chaining your strap (or not), chain Anchor your yarn with a dc in the first stitch of the next cup side. Count the amount of stitches left in the side of the cup – I have 8 repeats of (dc, ch 1) so altogether that’s 16 stitches. Chain your number, then skip the cup side and single crochet in the center ch-1 space. Chain the same number again, then skip to the last dc of the next side of the cup, dc in that stitch.
Repeat the edging across the rest of the bralette, mirroring the first side, all the way to across the band side, then cut yarn and tie off. Weave in all your ends, then rock on!